DC-HI-NET KOMPAKT is your building block system for measurement
sets and control systems. In the 19 inch module rack any combination of measurement device
interfaces can be accommodated. DC-HI-NET KOMPAKT offers the opportunity to change your
measurement sets just by adding further interface modules. Via the field bus interface you
can network several DC-HI-NET devices. There are virtually no limitations in variety and
quantity of measurement interfaces !
DC-HI-NET KOMPAKT consists out of:
- a 19 inch rack (desktop or rack version with 4 or 9 interface slots) incl. 230V power
supply, optionally with higher protecion class (splash-proof)
- a master- CPU with serial interfaces for the communication with the host computer and
- measurement device-specific interface modules in any combination.
|
Desktop device with slots for up to 9 DC-HI-NET interface modules
|
|
Desktop device with slots for up to 4 DC-HI-NET interface modules
|
|
Plug-in module "Multi-4" with automatical measurement device recognition, 4
inputs for manual digital measurement instruments and one input for synchronisation
contacts.
|
|
Additionally we suggest:
- a foot switch for a synchronised data capture, which can be connected to each interface
module
- a connection cable between DC-HI-NET and the host computer (PC, workstation or terminal)
and
- if necessary, suitable cable between DC-HI-NET and measurement devices.
Free of charge you receive on delivery:
- a power connection cable
- a DC-HI-NET user manual
- test and calibration software DC-DEMO (on request).
|
|
You need the following components to arrange a system
|
|
|
3 main types, special versions on request:
- Desktop housing "Basis 3" with slots for up to 9 interface modules
- Desktop housing "Basis 4" with slots for up to 4 interface modules
- 19" rack "Basis 5" with slots for up to 9 interface modules
- optionally: Versions with high protection class
|
|
Connection to the host computer via serial interface and
Networking with further DC-HI-NET without additional hardware.
|
|
Corresponding to the measurement device, selected from the
price list, afterwards replaceable.
|
|
To cover free slots (open slots are not admissible).
|
|
For the data transfer DC-HI-NET Host computer (PC, workstation or terminal).
|
|
Cable to the measurement devices
foot switch for synchronised data capture
|
Further support to select your appropriate configuration offers our Configurator.
|